GB 18322-2002 农用运输车自由加速烟度排放限值及测量方法

作者:标准资料网 时间:2024-04-28 19:41:05   浏览:8279   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:农用运输车自由加速烟度排放限值及测量方法
英文名称:Limits and measurement methods for smoke at free acceleration from agricultural vehicles
中标分类: 环境保护 >> 污染物排放标准 >> 流动污染源排放标准
ICS分类: 环保、保健与安全 >> 空气质量 >> 移动源排放限值
替代情况:GB 18322-2001
发布部门:国家环境保护总局国家质量监督检验检疫总局
发布日期:2002-01-04
实施日期:2002-07-01
首发日期:2001-03-21
作废日期:1900-01-01
主管部门:国家环境保护总局
提出单位:国家环境保护总局科技标准司
归口单位:国家环境保护总局
起草单位:北京市汽车研究所、中国农机研究院
出版社:中国标准出版社
出版日期:2002-07-01
页数:11页
适用范围

本标准规定了农用运输车在自由加速工况下烟度排放限值和测量方法。
本标准适用于农用运翰车。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 环境保护 污染物排放标准 流动污染源排放标准 环保 保健与安全 空气质量 移动源排放限值
下载地址: 点击此处下载
Product Code:SAE AMS5512
Title:Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 18Cr - 10.5Ni - 0.80Cb (SAE 30347), Solution Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, and plate.【英文标准名称】:StandardSpecificationforPressureVesselPlates,Heat-Treated,Carbon-Manganese-SiliconSteel,forModerateandLowerTemperatureService
【原文标准名称】:中温和低温设备用经热处理的碳锰硅钢压力容器板标准规范
【标准号】:ASTMA738/A738M-2007
【标准状态】:现行
【国别】:美国
【发布日期】:2007
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.11
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:
【英文主题词】:pressure-containingparts;pressurevesselsteel;steelplates;steelplatesforpressurevesselapplications
【摘要】:1.1Thisspecificationcoversheat-treatedcarbon-manganese-siliconsteelplatesintendedforuseinweldedpressurevesselsatmoderateandlowertemperatureservice.2.Materialunderthisspecificationisavailableinfourstrengthlevels,75ksi[515MPa],85ksi[585MPa],80ksi[550MPa],and90ksi[620MPa]minimumultimatetensilestrengths.1.3Themaximumthicknessofplatesislimitedonlybythecapacityofthechemicalcompositionandheattreatmenttomeetthespecifiedmechanicalpropertyrequirements;however,currentpracticenormallylimitsthemaximumthicknessofplatesfurnishedunderthisspecificationto6in.[150mm]forGradeA,4in.[100mm]forGradeB,and6in.[150mm]forGradeC.ForGradesDandE,themaximumpermittednominalthicknessis1.5in.[40mm].1.4GradeAisthematerialthat,priorto1984,wascoveredbySpecificationA738withoutagradedesignation.1.5ThevaluesstatedineitherSIunitsorinch-poundunitsaretoberegardedseparatelyasstandard.Thevaluesstatedineachsystemmaynotbeexactequivalents;therefore,eachsystemshallbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnon-conformancewiththestandard.
【中国标准分类号】:H46
【国际标准分类号】:77_140_30
【页数】:4P.;A4
【正文语种】:英语